Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need advices for buying an FPGA evaluation kit

Status
Not open for further replies.

yesme@

Member level 1
Joined
Jun 21, 2005
Messages
38
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,570
Hi guys,

I want to buy an FPGA evaluation kit for studying. I have a little of money, so which kit I should buy ?

Thanks,
 

first... wad money u hav :)

if it is USD... then it should b quite enough..

i would recommend Altera development board... if u are new to it.. i suggest u try the university program (UP2) which is only $99... u can get it in www.altera.com

if u want a better one, i would suggest the embedded processor FPGA dev. board.. but it is more expensive... go and hav a look in their website...

university student/instructor hav discount price which is very worth it...

there is other vendor like xilinx... it is just as good... just tht i dont try it before...
 

    yesme@

    Points: 2
    Helpful Answer Positive Rating
Refer to ELEKTOR magazine march 2005
 

money doesn't exceed 500$ for both of HW and SW - it's ok ?

I prefere Xilinx.
 

i would recommend you the Xilinx Spartan 3E Starter Kit ($149).

**broken link removed**

it comes with an evaluation version of Xilinx ISE and the Xilinx EDK. after the evaluation period expires you can continue to work with the Xilinx ISE webpack or you can buy the Xilinx ISE. buying the Xilinx EDK depends on you. if you want the added IP, microblaze, c compiler etc then you should buy that as well.
 

    yesme@

    Points: 2
    Helpful Answer Positive Rating
u can buy evaluation kit based on CYCLONE(altera) or SPARTAN3(xilinx).they are cheap.
 

hi
buy xililnx spartan3. it is best and also not that costly
 

For easy use and learn. Select Spartan3E start kit.
xilinx can prvide much more reference design for U.
 

For Starter .
I thinks Spartan3E is well done.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top