Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to extract CMOS transistors to get a simple model?

Status
Not open for further replies.
B

Blilix

Member level 1
Joined
Feb 28, 2006
Messages
40
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,682
I want to know how to extract CMOS model to get the simple parameter (Level 1 model). Is there any document that describe how to this?
 

you can use bsimpro+ or IC -Cap
 

Dear Biilix,

Model extraction from transistor need PCM data of signal device which is supplied by foundry.
Hspice manual has special topic describing this content.

Best regards,

Blilix said:
I want to know how to extract CMOS model to get the simple parameter (Level 1 model). Is there any document that describe how to this?
Click to expand...
 

Spice manual can show you the MOS parameters you need for every model (level1, 2,3 ..)

I've fabricated IC with mosis, and they give you the SPCIE parameters in several technologies:
AMIS 0.50 micron (C5)
AMIS 0.35 micron (C3O)
AMIS 1.50 micron (ABN)
IBM 0.5 micron (5HP, 5AM, 5DM, 5PA)
IBM 0.35 micron (5HPE)
IBM 0.25 micron (6HP, 6DM, 6RF)
IBM 0.18 micron (7RF, 7WL, 7SF, 7HP)
IBM 0.13 micron (8RF-LM, 8RF-DM)
TSMC 0.18 micron
TSMC 0.25 micron
TSMC 0.35 micron

You can get the parameters in the next link:
**broken link removed**

And the spice manual:
 
Last edited by a moderator:
  • Like
Reactions: king87

    K

    king87

    Points: 2
    Helpful Answer Positive Rating
hi, Mistico_Pereyra

How about the price of fabricating on MOSIS, is it cheaper than the MPW price of the Fabs?
BTW, my location is Shanghai China.
 
Last edited by a moderator:

The price depends of the technology you use!! And MOSIS's prices are expensive, you can get a low cost for fabrication if you(your institute, university, etc) are in their Educational Program (As I am).

This URL shows the prices for fabrication:
**broken link removed**

PD. You have to add the Packaging cost!!
 
Last edited by a moderator:

Mistico_Pereyra said:
Spice manual can show you the MOS parameters you need for every model (level1, 2,3 ..)

I've fabricated IC with mosis, and they give you the SPCIE parameters in several technologies:
AMIS 0.50 micron (C5)
AMIS 0.35 micron (C3O)
AMIS 1.50 micron (ABN)
IBM 0.5 micron (5HP, 5AM, 5DM, 5PA)
IBM 0.35 micron (5HPE)
IBM 0.25 micron (6HP, 6DM, 6RF)
IBM 0.18 micron (7RF, 7WL, 7SF, 7HP)
IBM 0.13 micron (8RF-LM, 8RF-DM)
TSMC 0.18 micron
TSMC 0.25 micron
TSMC 0.35 micron

You can get the parameters in the next link:
**broken link removed**

And the spice manual:
Click to expand...

Can you talk a little detail about how to get hand calculation params from High level model given by mosis?
 
Last edited by a moderator:

raamses2006 said:
Mistico_Pereyra said:
Spice manual can show you the MOS parameters you need for every model (level1, 2,3 ..)

I've fabricated IC with mosis, and they give you the SPCIE parameters in several technologies:
AMIS 0.50 micron (C5)
AMIS 0.35 micron (C3O)
AMIS 1.50 micron (ABN)
IBM 0.5 micron (5HP, 5AM, 5DM, 5PA)
IBM 0.35 micron (5HPE)
IBM 0.25 micron (6HP, 6DM, 6RF)
IBM 0.18 micron (7RF, 7WL, 7SF, 7HP)
IBM 0.13 micron (8RF-LM, 8RF-DM)
TSMC 0.18 micron
TSMC 0.25 micron
TSMC 0.35 micron

You can get the parameters in the next link:
**broken link removed**

And the spice manual:
Click to expand...

Can you talk a little detail about how to get hand calculation params from High level model given by mosis?
Click to expand...

what params that you interested to calculate?
 
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top