Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Type I PLL reference feedthrough in PD

Status
Not open for further replies.
N

neoflash

Advanced Member level 1
Joined
Jul 2, 2005
Messages
492
Helped
10
Reputation
20
Reaction score
2
Trophy points
1,298
Activity points
4,759
Hi, folks:

In Rolland Best's PLL book, chapter 3.4.3, he stated that if the PLL used EXOR as the phase detector, the reference feed through will modulate the VCO output when divider N=3.

The modulated frequency component will be N*Fref +/- 2Fref and N*Fref +/- 4Fref.

My question is that why there is compenent located at N*Fref +/- 4Fref?

( i guess analog board is a wrong place to post it. )
 

I think the answer is that XOR gates make poor phase detectors. Modern charge pump phase detectors have an almost zero output spike when the PLL is locked. That spike is easily filtered with a simple RC lowpass filter.
'
XOR gates acting as phase detectors have a 50% duty square wave out (0 to +5Volt swing) when the PLL is locked. THAT is a huge amount of energy at the reference, and being a square wave has lots of odd harmonics in it. Probably 30 dB harder to filter out.
 

    N

    neoflash

    Points: 2
    Helpful Answer Positive Rating
Oh, yes, the XOR gate is giving out square wave output and have energy at odd harmonics.

thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top