Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to add the S-parameter into ADS(2003A) Library?

Status
Not open for further replies.
J

John_li

Full Member level 5
Joined
Aug 6, 2005
Messages
272
Helped
9
Reputation
18
Reaction score
1
Trophy points
1,298
Activity points
2,945
Can anybody do me a favor to tell me how i can add s-parameter into ADS(2003A)?
Thank you for your kindness&B.R,
John
 

Easy, generate/get a 'touchstone' S2p file. Use the 2-port data block and select that file
 

    J

    John_li

    Points: 2
    Helpful Answer Positive Rating
How to add the S-parameter into @DS(2003A) Library?

This is a basic thing.
 

    J

    John_li

    Points: 2
    Helpful Answer Positive Rating
if you use s2p file download from the website then use the 2 port data item,
then click the icon, and select your s2p file!
that is OK!
 

    J

    John_li

    Points: 2
    Helpful Answer Positive Rating
Re: How to add the S-parameter into @DS(2003A) Library?

I did it as following:
enter"system-passive"----->select"two port"component------>double clickthe component------->instance name enter:bfp620f---->parameter entry mode select:file based----->data access component instance:E:\(that my s2p file entry)------>dependent parameter name entered:bfp620f or bfp620f.s2p------->apply.
But in Vain(indicated"syntax error in value",i do not know what happens.I changed another corect s2p file that can be used successfully in EEsof,the same problem.Can you tell me what is the matter?
thank you a lot!
 

have you selected "Touchstone" option from 'file type' option?

/Kella
 

    J

    John_li

    Points: 2
    Helpful Answer Positive Rating
Re: How to add the S-parameter into @DS(2003A) Library?

The s2p file that i can simulated in EEsof,but can not add in ads.so i do not know what happens now.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top