Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to simulate a balanced-unbalanced (BALUN) transformer in Pspice

Status
Not open for further replies.
Ashtaroth

Ashtaroth

Junior Member level 1
Joined
Dec 17, 2004
Messages
19
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Location
Oxford
Activity points
136
hello


how can i simulate a balanced-unbalanced (BALUN) transformer in Pspice?
 

pspice balun

Hi,

You can use transformers or transmission lines. Look how to use it in the following links :

h**p://www.antennex.com/preview/archive3/Jan4/pspice.htm
h**p://www.cse.secs.oakland.edu/oakley/Papers/edu_softtools_2001.pdf

Replace * by t
 

Re: BALUN in Pspice

thanks but i am looking for the code that i have to type in pspice for a transformer like the one in the image
 
Re: BALUN in Pspice

Hi,

You can use a 'K' device. Put this 'K' device on the schematic and its properties Set L1 to Lp1, set L2 to Lp2 and set L3 to Ls. Edit also Lp1, Lp2 and Ls properties and set their respetive values (ex : Lp1 = 10µH, Lp2 = 50µH, Ls = 5µH).

You can also adjust the coupling parameter's value. Max value is 1.

Look here for a graphical example :

h**p://www.rose-hulman.edu/~doering/homepage/pspice.htm

Replace * by t
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top