Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What's the difference of three .synopsys_dc.setup?

Status
Not open for further replies.
5

5life

Junior Member level 1
Joined
Mar 5, 2004
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
158
synopsys_dc.setup

Error : Can't read Tcl File /multiplex/.synopsys_dc.setup in your working directory because you read the defaut format in home init.

What's the matter ? And what's the diffrence among the 3 .synopsys_dc.setup?

Another Error: Undefined operator on or near line at or near "set '

My .synopsys_dc.setup : set link_library class.db
.....

What's wrong with my DC ?
 

read synopsys_dc.setup

Please set serach path apropriately , else mail me your .setup file i will help you
 

    5

    5life

    Points: 2
    Helpful Answer Positive Rating
.synopsys_dc.setup

you are using tcl mode or the dsh mode ???
 

synopsys_dc.setup tcl

dc_shell used.

I copy the $SYNOPSYS/admin/setup/.synopsys_dc.setup to my working directory , And I modified the search_path ,target_library,link_library,symbol.library.

And the above appears.

And I create a new .synopsys_dc.setup in my home directory, as below:

search_path = {} + search_path
link_library = {"*" class.db};
target_library = {class.db};
symbol_library = {class.sdb};
define_design_lib work -path work;

create a new file in my working directory as below

search_path = {.,~/multiplex} + search_path
link_library = {"*" class.db};
target_library = {class.db};
symbol_library = {class.sdb};
define_design_lib work -path work;


It works, No any waring!
 

there are two kinds of type : dcsh and tcl_mode:
 

NO set in set target .....
pls check if your .setup file can be 777 mode
 

My last .synopsys_dc.setup file is coded by dc_shell
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top