Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to drive 2 or more device at high speed cmos/ttl 3.3V ?

Status
Not open for further replies.
T

TERRYWU3

Member level 1
Joined
Jan 10, 2003
Messages
40
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
301
Hi ,
I want to drive more devices , but many logic buffer speed is about 5ns
My source speed is 3.3V 160MHz

Could you suggest me any advise ?

very thanks~
 

Re: How to drive 2 or more device at high speed cmos/ttl 3.3

Hi

Use LVDS or CPL technologi from MAXIM or NS

If you want to know more search google

there are many type of components in this category


If you found my answer useful, click on the button that says Helped me. ( NO points will be taken from you! )

All the best

Bobi
 

    T

    TERRYWU3

    Points: 2
    Helpful Answer Positive Rating
Re: How to drive 2 or more device at high speed cmos/ttl 3.3

I don't think you have a problem there. 160MHz is a "turtle speed", well, maybe not exactly, but the 3.3V logic should cope with this frequency comfortably..
If you think you need it, just use addiional 3.3V gate as a buffer..
 

    T

    TERRYWU3

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top