Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Adding a new net in SoC encounter

Status
Not open for further replies.
O

oAwad

Full Member level 2
Joined
Feb 15, 2017
Messages
136
Helped
0
Reputation
0
Reaction score
0
Trophy points
16
Activity points
1,312
Hello,

Can I add a new net in SoC encounter (a modification wire after P&R) without being present in the imported netlist ?

Thanks
 

oAwad said:
Hello,

Can I add a new net in SoC encounter (a modification wire after P&R) without being present in the imported netlist ?

Thanks
Click to expand...

Yes. Draw the wire any way you want with the routing tool. Name it anyway you want by changing its properties. No rocket science.
 
  • Like
Reactions: oAwad

    O

    oAwad

    Points: 2
    Helpful Answer Positive Rating
Well, I select "Add wire" and try to draw it, but I get an error "open edit route form to input net name". I do so and give an arbitrary name, but then I get another error saying "net name is invalid".
 

addNet is used to add a net for ECO purpose.

If you want to route a net manually, first select the net and shift+A ( add wire ).
 
kumar_eee said:
addNet is used to add a net for ECO purpose.

If you want to route a net manually, first select the net and shift+A ( add wire ).
Click to expand...

Thank you, if I want to add a new output port to my layout (which is already designed), should I use ECO ?

Basically, I want to add a new output port with no routing..no cells..nothing and I will manually route it afterwards. How to do that ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top