Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

SMA Connector in hfss

Status
Not open for further replies.

Alex329

Junior Member level 3
Joined
Oct 14, 2016
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
272
Hi

I would like to know if it's possible to modelise an SMA connector by a "vertical" rectangle in hfss? Why and how?

Thank you
 

It's possible to model SMA connector but why you would like to model it using 'vertical' rectangle , any specific need?
 
It's possible to model SMA connector but why you would like to model it using 'vertical' rectangle , any specific need?

I saw an exemple in an ieee article where they used an sma connector but in their hfss design, the authors modelised it as an vertical rectangle(excitation along z axis) which intersects( touches) an antenna coax cable(oriented along z axis) at 2 spots. Do you know why they modelised it like that?
 

Can you attach a pic of the SMA connector that you are referring to ?
 
You can use a sma connector from HFSS 3D component library included since v17 I believe.
 
- - - Updated - - -

Can you attach a pic of the SMA connector that you are referring to ?

sma.jpg
sam.png

Here is the SMA which I am talking about. Why did they represent it like that? In which case can I modelise it like this? Can I always do something like this?

- - - Updated - - -

I don't have hfss v17 ? I am using v13. Is it possible for you to send me the SMA that you are talking about please?
 

[
You were probably looking at a simulation using a terminal port. My preference is to use a modal port with dimensions that resemble the particular feed line. Look at the on line documentation for more details and information.

Regards,

Azulykit
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top