Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

a DRC issues(for Eagle software)

Status
Not open for further replies.

namaz

Newbie level 4
Joined
Nov 21, 2016
Messages
7
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Activity points
61
I designed a simple one layer PCB by Eagle CAD and want to manufacture it, I send it to PCB fab but they told me my design can't passed their DRC. they told me the minimum spacing between the trace and board edge they can manufacture is 12mils, I setup the value but there are some "overlap" errors on the lower right corner. Is there any way can fix the warning?
 

Hi,

Show us the board detail and the complete DRC error, which layers are overlapping.

Klaus
 

Did you make the one layer thing correctly?? make sure the "keep in" line for bottom side is still there specially if you have THT components.

Ciao!
 
  • Like
Reactions: xartadvisor

    xartadvisor

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
Did you make the one layer thing correctly?? make sure the "keep in" line for bottom side is still there specially if you have THT components.

Ciao!

i made a wrong one layer file, there is no components in the bottom layer but also need make some line for keep out layer...
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top