Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

crosstalk helps hold or setup?

Status
Not open for further replies.
M

mepriyasingh

Member level 2
Joined
Sep 20, 2015
Messages
42
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
255
Crosstalk helps hold or setup? and why?
Thanks
 

If crosstalk increases propagation delay, it can help hold and make setup worse. (But it can be the other way too).
 
jbeniston said:
If crosstalk increases propagation delay, it can help hold and make setup worse. (But it can be the other way too).
Click to expand...

Meas both can be violated and help? depending on condition. right.
 

crosstalk can help increase or reduce the delay of datapath...... which there by can violate setup or hold times.
 

Cross-talk affects both Setup and Hold, just that depends on both the signals switching direction.

Hold may get affected if both switches in the same direction & Setup gets affected if both switches in the opposite direction.
 
kumar_eee said:
Cross-talk affects both Setup and Hold, just that depends on both the signals switching direction.

Hold may get affected if both switches in the same direction & Setup gets affected if both switches in the opposite direction.
Click to expand...

The best description.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top