Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to different drive strength standard cells?

Status
Not open for further replies.
B

BB11

Member level 4
Joined
Jan 4, 2010
Messages
74
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
india
Activity points
1,828
How to draw different drive strengths (2x, 4x) in standard cells?

Hi

Could anyone please show me how to draw a and gate with 2 inputs and different drive strengths of 2x,4x...pls!

Thanks
BB
 

Hi

Basically the AND gate is made of a NAND gate + an inverter stage.
Usually the NAND gate transistor sizes are common to all drive strengths, and the inverter stage has an adapted drive strength.

For example:
- x1 : has an inverter stage with NMOS with W=1u and PMOS with W=2u
- x2 : has an inverter stage with NMOS with W=2u and PMOS with W=4u
- x4 : has an inverter stage with NMOS with W=4u and PMOS with W=8u

etc...
 
  • Like
Reactions: BB11

    B

    BB11

    Points: 2
    Helpful Answer Positive Rating
Hi Chris

Thanks for your reply. So I dont need to add anther nand gate from the output of the 1 st nand gate?
I assumed that I need to have 2 outputs from the first Nand Gate and each output will have a nand gate respectively.

Looking forward for your reply.

Thanks
BB
 

Hi

No this is not needed because: the NAND is driving the output INVerter which gives the drive strength.

Cheers
 
  • Like
Reactions: BB11

    B

    BB11

    Points: 2
    Helpful Answer Positive Rating
Hi

AND GATE = NAND + INV
OR GATE = NOR + INV

now the NANDx2 gate differs from the NANDx1 gate in that the transistors have typically a size (W/L) 2 times bigger
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top