Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How do I minmise the Vgs drop across the Mosfet?

Status
Not open for further replies.
U

ug02048

Junior Member level 2
Joined
Oct 11, 2004
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
192
vgs drop

I wanted to build a unity gain buffer. Any help is appreciated.
 

sooch cascode

use a cascode structure,the different w/l& you can reduce the vgs.
 

sooch bias

what is a sooch cascode ? can you explain it in detail because i have never heard of it before
 

sooch mos cascode current mirror

gray's book

page 271
 

mosfet vgs drop

can you upload a picture?
 

drop across the mosfet when it is on

Here is a picture of it. There exists also a good IEEE-paper from sooch describing this circuit.
 

Can you explain how it works? many thanks in advance..
 

Look for the Gray's Book p. 271 (perfectly explained) or the paten of Sooch:

N.S. Sooch "MOS Cascode Current Mirror" U.S. Patent 4,550,284 October 1985.
(look for a patent server)
 

I was never in favor of using this current mirror.
Much of the accuracy stemmed from accurate modelling. The circuit tries to bias the lower n-channels just enough for them to breath. this posed a great danger, any mishap can tipped u over into the triode. ur accuracy could suffer...
ur design need to be as free of modelling as possible
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top