Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how ads simulate communication system including rf and dsp

Status
Not open for further replies.
H

hgdllt

Junior Member level 2
Joined
Oct 18, 2004
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
102
i am a dsp disigner. but now i deed to simulate rf communication system including adc,dac and digital modulation.

waht book i should read? i have read razavi and h.lee about rf.

Could anyone give me a practical mixed design example (i mean a design includes RF and DSP) based on @DS?

how to simulate system including adc and rf receiver?
 

Re: how ads simulate communication system including rf and d

Ptolemy is the ungine that is used by @DS to simulate communication systems.
There is the possibility to use co-simulations with blocks at circuit level (using envelope in the circuit level block).
There's alot of literature available, look at elektroda or directly in @DS manual or in @gilent web site.
I hope it can help.
Mazz
 

Re: how ads simulate communication system including rf and d

thank Mazz
i want to know that is it practical to simulate AD control in ads when using ptolemy?
 

how @DS simulate communication system including rf and dsp

it is my target also. is there any example for simulation in @ds including adc ,rf and DSP arithmetic.
 

Re: how ads simulate communication system including rf and d

I've taken an exampple on ADC:

This example demonstrates the Timed ADC and DAC models in Advanced Design System through a basic digital audio codec application. These models are suitable for the modeling of ideal or non-ideal conversion in signal processing applications.

It's an @DS project. rename it with extension zap and open directly with @DS
I hope it can help.
Mazz
 
  • Like
Reactions: hgdllt

    H

    hgdllt

    Points: 2
    Helpful Answer Positive Rating
how @DS simulate communication system including rf and dsp

ADS can simulate the RF and DSP with the tools named co-simulation. for example if you want to simulate one system contains DSP part and RF mixers,you cna use co-simulation to simulate the spectrum and power output. I have done some work at this aspect and I think there are problem about the accuracy of simulation.
you can refer to the example or search them from the "help" documents/
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top