Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

MAX7219 as Volts/Amps Displayer

Status
Not open for further replies.
imranahmed

imranahmed

Advanced Member level 3
Joined
Dec 4, 2011
Messages
817
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Location
Karachi,Pakistan
Activity points
6,492
Please let me know that about combine amp and volt meter Arduino UNO based.

I want to display amperes and voltages on seperate 3 digits 7-segment display

3 digits for amps and 3 digits for volts and using 2 channel of ADC.

But how to display using MAX7219 ,can anyone interesed to tell me?

Only hint I need.
 

There is any arduino library available for displaying float values comes from adc

on 7-segment display by using MAX7219 with arduino.
 

Then why don't you use that ? I have a non Arduino C Code for displaying two 3 digit values on eight 7 Segment displays. I am using it for a stabilizer which displays IN volts and OUT volts. I will post it in a day or two. I have to find it on my disk.
 
milan.rajik said:
Then why don't you use that ? I have a non Arduino C Code for displaying two 3 digit values on eight 7 Segment displays. I am using it for a stabilizer which displays IN volts and OUT volts. I will post it in a day or two. I have to find it on my disk.
Click to expand...

I think he means there is no library available for displaying float values comes from adc ??
 

Is there any arduino library for displaying ADC float values by using MAX7219.
 

I have c code which displays float values on MAX7219 based 8 digit 7 Segment displays. I will post it soon. You can convert it to Arduino code.
 
I wrote this code using Arduino UNO MAX7219 library and want to display 8.03
it cannot display 8.03 but it displays 8.05 when I write 8.06 it displays 8.08

Not exact value display??
What can I do for fix this issue?


Code: 
int CTones=0 , CTtens=0 ,CThundreds=0; 
unsigned int CTdv1=0;
float CT_SET = 8.03;
    
    if(CT_SET >= 0 && CT_SET <= 10)
    {
    CTdv1 = CT_SET * 100;  
    dp0 = 1;     
    dp1 = 0; 
    dp2 = 0; 
    CTones = (byte)CTdv1%10;
    CTtens = (byte)(CTdv1/10)%10;
    CThundreds = (byte)(CTdv1/100)%10;   
    lc.setDigit(0,2,(byte)CTones,dp2);
    lc.setDigit(0,1,(byte)CTtens,dp1);
    lc.setDigit(0,0,(byte)CThundreds,dp0);    
    } 
    else if(CT_SET >= 10 && CT_SET <= 99)
    {
    CTdv1 = CT_SET * 10;  
    dp0 = 0;
    dp1 = 1;  
    dp2 = 0;
    CTones = (byte)CTdv1%10;
    CTtens = (byte)(CTdv1/10)%10;
    CThundreds = (byte)(CTdv1/100)%10;   
    lc.setDigit(0,0,(byte)CThundreds,dp0);
    lc.setDigit(0,1,(byte)CTtens,dp1);
    lc.setDigit(0,2,(byte)CTones,dp2);
    } 
    else if(CT_SET >= 100 && CT_SET <= 999)
    {
    CTdv1 = CT_SET * 1;
    dp0 = 0;
    dp1 = 0;  
    dp2 = 0;  
    CTones = (byte)CTdv1%10;
    CTtens = (byte)(CTdv1/10)%10;
    CThundreds = (byte)(CTdv1/100)%10;   
    lc.setDigit(0,0,(byte)CThundreds,dp0);
    lc.setDigit(0,1,(byte)CTtens,dp1);
    lc.setDigit(0,2,(byte)CTones,dp2);
    }
    else if(CT_SET > 999)
    {
    lc.setChar(0,0,'-',false);
    lc.setChar(0,1,'-',false);
    lc.setChar(0,2,'-',false);
    }     
    else if(CT_SET < 0)
    {
    lc.setChar(0,0,'-',false);
    lc.setChar(0,1,'-',false);
    lc.setChar(0,2,'-',false);
    }
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top