Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to enter complex conductivity vs. frequency into CST

Status
Not open for further replies.
C

carbon9

Member level 3
Member level 3
Joined
Dec 31, 2006
Messages
60
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,746
Hi,

Following the discussion here: https://www.edaboard.com/threads/223918/ I obtained complex conductivity vs. frequency data of graphene material. I'm using CST and I don't know how to enter complex conductivity values in CST. I searched a lot for several days and what I concluded that I can only enter frequency dependent conductance into CST but it doesn't get complex numbers. Do you have any idea on this?

Any help is greatly appreciated. Thanks a lot.
 

Thanks for fast reply. I don't know how to convert to complex permittivity. Could you please help on this?
 

hi, i am not sure this is correct, but this is how i did it:

1)obtain graphene conductivity from kubo formula using Matlab.
2)create new material->choose type:surface impedance
3)properties->load file from matlab
*it needs three columns (frequency, resistance, and reactance)
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top