Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What are the first steps in developing a circuit board?

Status
Not open for further replies.
H

hannover90

Member level 4
Joined
Dec 8, 2009
Messages
70
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Germany
Activity points
1,784
Dear all,

I've already designed my chip for tape out, which contains of 3 different analog circuits.

Accoording to the chip, I want to develop a circuit board for the first time. Unfortunately, I don't have any knowladge.

Could you please give me some advise, how can I start, what are the first steps and which points are important to develop the board.

Thank you very much in advance.
 

hi,
let me know which tool r u using to develop PCB tool according to that i will try to reply.but before some basic you need,
1.Draw the schematic in tool,generate the Bill of material and Manufacturer part no and the download the datasheet after that create the footprint for that symbol.
2.Map the Footprint with schematic symbol and then generate the net list and import the net list in layout tool
3.draw the board outline in layout tool and then place the component and then route the signal from source to destination and the complete the all the signal like that
4.generate drill file and gerber file this is the basic i shortly explain to you but it is big process depends on design
 
Hi,
thank you very much for your help.
I am using cadence allegro.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top