Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ROYER CIRCUIT,Transformer design.

Status
Not open for further replies.
M

myfaithnka

Advanced Member level 4
Joined
Nov 5, 2010
Messages
106
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
2,022
CAN ANY ONE PLEASE TELL ME HOW I CAN DESIGN A ROYER CIRCUIT FROM SCRATCH...

My purpose is for driving CFL tubes.


I am totally newbie to ferrite transformer winding methods...At the retailer, I hear there are some sizes and types too.I am totally confused about this LC circuit frequency selection.
 

You might check some Application Notes, for example App Note 118 from Linear Tech, the CCFL Transformers can be bought from Digikey for ~$10 (Coiltronics),
the frequency calculation is f= 1/(2*pi*sqrt(L*C)), see also https://www.daycounter.com/Calculators/LC-Resonance-Calculator.phtml,
I guess that in case of Royer only the 1/2 of the primary inductance is used in the calculation
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top