Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

CMFB and Operating Floating Amp

Status
Not open for further replies.

ghostdog

Newbie level 3
Joined
Sep 11, 2013
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
16
hi everybody,

when designing an amplifier like this one
Untitled1.jpg

and in Johan Huijsing, OPERATIONAL AMPLIFIERS, Theory and Design, Kluwer Academic Publishers, 2001, Ch 9 for this amplifier design says something like this
Untitled2.jpg

should i use a CMFB?

thk
 

I think the circuit already has a CMFB around the first stage as mentioned in the text. For the 2nd and 3rd stages they don't need CMFB because they are self-biased and not supplied by current sources from both top and bottom. This is assuming good matching of the current mirrors between the 2nd and 3rd stages.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top