Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

ultra wideband directional coupler~

Status
Not open for further replies.

HOHOH

Member level 5
Joined
Feb 13, 2002
Messages
82
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,288
Location
Korea(the Republic of Korea)
Activity points
483
wideband directional coupler

I want to find the solution about directional coupler.

frequency bandwidth : 100KHz ~ 3GHz, 100KHz ~ 6GHz
coupling value : 3, 10, 20dB
directivity : min 20dB

Is it possible?

Please, help me.
 

directional bridge

It's really wideband.

"RF and Microwave Coupled-line Circuits" by Rajesh Mongia might triger some idea.

"Nonuniform Line Microstrip Directional Couplers and Filters" by Sener Uysal may also help.

Personally I think the 100KHz to 6GHz is almost impossible.

Soon
 

wideband directional coupler vna

Look into using diplexers to combine two or more couplers each for a different frequency range. The diplexers are on all four external ports of the combined coupler.
 

hp778d

I have opened once the directional bridge from our HP8753 network analyzer, frequency range from 300 KHz to 3 GHz.
It is very complicated and seems that the tuning is hand made .
If you need a picture I will open it again.
If you need a coupler with coupled lines the best is the old HP 778 D ( 100 MHz to 2 GHz ).
Going to a lower frequency the phisical dimension of the coupler is becoming larger and so the losses.
Better is something like a bridge, but the attenuation is fixed.

Mandi
 

directional bridge coupler

If you do not mind the coupling to change with frequency, ordinary parallel transmission line ones have a coupling coefficient which is proportional to the sine of the line length at the frequency you are using.
 

hp 778 directional coupler

Hi FANT,

I'd appreciate if you could post (perhaps PM, not to overload the list) a few photographs from different angles on the directional bridge of the 8753 VNA.
One can always learn a lot, knowing how HP realize things that are difficult to do.

Thanks in advance
g579
 

anren wideband rf coupler

Hi, FANT

Thank you for your reply.

I want to see the pictures.

If you show the pictures, possible, please show me.

Thank you.

FANT said:
I have opened once the directional bridge from our HP8753 network analyzer, frequency range from 300 KHz to 3 GHz.
It is very complicated and seems that the tuning is hand made .
If you need a picture I will open it again.
If you need a coupler with coupled lines the best is the old HP 778 D ( 100 MHz to 2 GHz ).
Going to a lower frequency the phisical dimension of the coupler is becoming larger and so the losses.
Better is something like a bridge, but the attenuation is fixed.

Mandi
 

ultra wide band frequency coupler

The instrumantal directional couplers are easy in the schematic topology but difficult to replicate and require very accurate mechanics and very good operative skilness.
If not... why only few high cost companies like Agilent, Rhode-Schwarz sell it?
 

wide band rf coupler

Taken the pictures today; tomorrow or saturday afternoon I will post them.
Due to the fact the pictures are quite large ( about 1,3 M each ) can anybody explain me how to post more pictures in a post ?

Mandi
 
8753d couplers

If you compress them as .rar or .zip you can put four per post.
 

vna directional coupler

Are the wideband components designed with very different theories?
 
  • Like
Reactions: punas

    punas

    Points: 2
    Helpful Answer Positive Rating
|hp778d

Here the pictures; sorry but my winrar program won't compresso, so only Winzip.

If necessary anything else just ask.

Mandi
 
directional coupler vna

Hi FANT,

Thanks for the photos. I'll try to understand how this directional bridge details work.
I'll ask perhaps 2 or 3 more photos on some details.
Thanks anyway. As usual I always learns from HP.
g579
 

coupler 8753d

I hope this application note guide to understand how this directional bridge details work. The extra broadband ballun realization is the preferred section in the bridge.
 
hp 778d

I hope this application note guide to understand how this directional bridge details work. The extra broadband ballun realization is the preferred section in the bridge.
 
printed wideband directional coupler

Here's another intersting article on directional bridges. Probably similar to 8753 coupler.
 
hp directional couplers

Hi,All
Thanks very much for your sharing of the photo and the app notes
 

i have a question , how can i make a directional coupler wideband?

Added after 3 minutes:

i meant tell me the method for making a wideband directional coupler.
 

Woahh the pictures of the internal bridge in the 85044A are really impressives. Thank's for sharing
 
  • Like
Reactions: spasma

    spasma

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top