Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] NFC Tag Types Detection

Status
Not open for further replies.
N

nsypid

Junior Member level 3
Joined
Dec 21, 2011
Messages
25
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,442
Is there any documentation on different types of NFC Tag available and how to detect them ?
So i can use them for example, to show what types of Tag it detects in PC ?
 

active tags and passive tags active tags which have their on power supplies whereas a passive tag will get power from the reader ,. both the tags are detected
 

I mean the kinds of NFC tag. I read there are 4 types of tags. then there are proprietary tags like mifare, etc. How i can detect what types of tags it is by reading it with a reader ?
 

The NFC Forum documents specify how to determine the Tag Type. Type 1 and Type 2 are both ISO 14443-3 Type A, Type 3 is Felica and Type 4 is ISO 14443-Type A or Type B. There are bits set in the initial responses to indicate that the tag is an NFC Forum tag and which type. There is an NFC Forum document for each tag type that describes all of the specific bits and bytes. I'm pretty sure these documents are publicly available.
 
  • Like
Reactions: nsypid

    N

    nsypid

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top