Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Plot gm/id vs (id/(w/l)) curve in spectre-cadence

Status
Not open for further replies.
V

vijith133

Member level 1
Joined
Jul 16, 2012
Messages
38
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,568
Hi,
I am trying to plot gm/id vs (id/(w/l)) curve of a transistor for design of OTA, i referenced many suggestions in the community but none of them is giving a clear idea about how to plot the above mentioned curve.

I am able to get the plots for gm/id vs id , but when i am trying to do the parameter sweep w/l and check the results browser only one option is coming- variables.

I am struck with this, could anyone please suggest some idea for this problem.

Pls suggest the clear ideas how to get the curve in cadence spectre simulator in linux environment if possible.

thanks in advance
 

Hi,

You can do it from dc analysis. In sweep parameters choose the "component parameter" position, like this:
DCGm.png
Run simulation and now you can plot transconductance curve vs w or l of transistor.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top