Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help with λ/4 monopole antenna.

Status
Not open for further replies.
Please observe the MIMO antenna.pdf i have attached.
In general,when defining port in hfss,the ground is below the dielectric and the radiating element at the top of dielectric.
But in this design,both the radiating element(monopole antenna) and the ground are on the top of dielectric(fr-4).In this case,how should i define the port?
 

whats the problem ?? they did a come type of design its like a dipole microstrip and its type of RFID antenna
 

gkkashyap said:
a similar lambda/4 monopole antenna design i am trying to simulate in hfss but stuck with excitation.please help me how to excite it.i have attahced the pdf i working out for my project.

thanks well in advance!
Click to expand...

u can try using a waveguide port in hfss
 

You can model PCBs using AN-SOF. You can ask for a free version in this link

**broken link removed**
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top