Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

need help on microcontroller and lcd module.....

Status
Not open for further replies.
A

adbonja2000

Newbie level 1
Joined
Nov 13, 2004
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
8
i have a problem.... and need an opinion, an example or anything information that can help to solve my problem....
my question is how to programme lcd module using microcontroller????
basically i use assembly languange for my project
i use microcontroller motorola MC68HC11E1
lcd module Tranma Alphanumeric dot metrix liquid crystal displays without backlighting, 14 pins, for example....RS stock numbers 184-8538
the lcd data sheet can be found at the www.rsmalaysia.com
this project very important for my final year study....
so plz i beg u all help me!!!!!
[/code]\][/list]
 

I did NOT look up your LCD , but assumes it is "Hitachi HD44780" compatible , most characterbased LCD displays are.

10 seconds with google reveals this

**broken link removed**

I will leave the challenge of interfacing to the HC11 up to you.

But it might be a good idea to use "HD44780" as one of the google parameters , it should ensure lots of hits (also for the hw. connection).

Btw: Pay attention to the initialization routine if you choose to tun in 4-bit mode , that is the only pitfall in 4bit vs 8bit mode.

/Bingo

Hmmm.. Are you sure the Lcd name isnt TIANMA ??
 
Have a look here for HD 44780 info

http://www.myke.com/lcd.htm
http://home.iae.nl/users/pouweha/lcd/lcd.shtml
**broken link removed**

I did a search on google , for "Tranma lcd" and there was only one hit.
http://www.piergm.com/elettronica/datasheet/Display%20LCD%20'intelligenti'%20alta_grafici/HD44780.pdf "But it seems like the link is not valid"


You should still read the DS and find out if ots a HD44780 compatible controller that is on. (Lots of controllers are 44780 compatible , even though they are named something else".

I would still expect it might be Tianma.

/Bingo
 
hi adbonja 2000,

i love motorola ic because it is easy to handle even now i go to pic because it is cheaper. what'up buddy. contact me at sabree8@hotmail.com for help if you really need me.

bye
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top