Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to make solid box or sphere in HFSS

Status
Not open for further replies.
M

mah@sh

Newbie level 6
Joined
Dec 31, 2012
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,335
how to make hollow box or sphere in HFSS

iam new to hfss plz help me out
 

Re: how to make hollow box or sphere in HFSS

you can create two boxes/spheres and then subtract them by booln operator.
 
  • Like
Reactions: mah@sh

    M

    mah@sh

    Points: 2
    Helpful Answer Positive Rating
Re: how to make hollow box or sphere in HFSS

hamidrezakarami said:
you can create two boxes/spheres and then subtract them by booln operator.
Click to expand...

thank u

other than this, can we define the material inside a box or sphere (like defining dielectric in a metal box)
 

yes you can make arbitrary shaped dielectric inside the metal. a wide variety of the circuits (High frequency circuits) placed inside the cavity/ metal box.
 

hamidrezakarami said:
yes you can make arbitrary shaped dielectric inside the metal. a wide variety of the circuits (High frequency circuits) placed inside the cavity/ metal box.
Click to expand...


oh, how to make it.
 

you can create your circuit in the HFSS workplane and set all the boundary condition to "Prefec E". This is means that circuit is inside the cavity metal.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top