Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] pls give me idea about LUT verilog

Status
Not open for further replies.
D

diaz080

Member level 4
Joined
Oct 3, 2012
Messages
73
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,714
i have no idea about this LUT..need 2 design a 3 bit multiplier using this method..any help
 

A multiplier using a Look Up Table with 3-bit inputs?

Use the two inputs as an address to a memory and the data at each address is the multiplied value of the two inputs.

-alan
 
You have a 6-bit input LUT. Lower 3 bits are multiplier; high 3 bits are multiplicand. Data at address 0 is 0 (0 x 0). Data at address 10(001010) is 2 (001 x 010). Data at address 27 (011011) is 9 (011 x 011) etc.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top