Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to use RS432/RS485 in Xbee

Status
Not open for further replies.
P

piyush manavar

Member level 4
Joined
Jul 23, 2009
Messages
78
Helped
10
Reputation
20
Reaction score
8
Trophy points
1,288
Location
india
Activity points
1,827
Hi,

Does Xbee supports RS 432/RS 485.

If it is then how i can interface it.
And if it is not, then what is other option for wireless communication for the same protocol.


Thanks

-Piyush
 

Re: Xbee and Rs432/RS485

u can use 232 protocol na it works good in Xbee
 

Re: Xbee and Rs432/RS485

Hi nagabhargavamrita

nagabhargavamrita said:
u can use 232 protocol na it works good in Xbee
Click to expand...

But my exiting system had only these two protocols. To change in to RS232 it is very difficult.
That's why i want RS432/RS485.

Thanks

-Piyush
 
Re: Xbee and Rs432/RS485

piyush manavar said:
i want RS432/RS485.
Click to expand...
You can interface RS485 via UART and a couple of IOs. All you need is an RS485 driver like MAX485, or SN65HVD3082.
**broken link removed**
Interface - RS-485 - SN65HVD3082E - TI.com

Hope that helped.
Alexandros
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top