Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

89S52 89S51 DIP to TQFP code is the same ?

Status
Not open for further replies.
G

ggmssr

Member level 2
Joined
Oct 25, 2011
Messages
48
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,586
Can i put the same microcontroller code into SMD and DIP case.

Code writen for DIP, can I put into PLC or TQFP ?
 

yes you can use same code but you need to verify other package pin outs for your hardware connection.
 
  • Like
Reactions: ggmssr

    G

    ggmssr

    Points: 2
    Helpful Answer Positive Rating
If is DIP, dip have lower number of pins then TQFP, this say that that extra pins in TQFP not used. I think that this will work, I mean DIP to TQFP?
 

ggmssr said:
If is DIP, dip have lower number of pins then TQFP, this say that that extra pins in TQFP not used. I think that this will work, I mean DIP to TQFP?
Click to expand...

If the both package types are of the same model of 8051.

Yes, it should work. And as long as the proper pinout connections are made to the device and the oscillator configuration is the same.

BigDog
 
  • Like
Reactions: ggmssr

    G

    ggmssr

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top