Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

System Calculation Book For Wireless RX

Status
Not open for further replies.

MFayek

Junior Member level 1
Joined
May 15, 2010
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,416
Inquiry: System Calculation Book For Wireless RX

Dear All,

I'm working on designing an LTE receiver. I'm searching for a book that can help me in system calculations .as i'm currently in the system level step.

Could anyone give me a hand in this by advising a specific title for some kind of book or a ref

All suggestions are appreciated.:smile:

Thanks in advance
 

Hello my friend
try the book of professor H vincent poor , ( professor of princeton university ) , maybe helpful for you .( hes is a best professor of wireless network)
Best Wishes
Goldsmith
 

I've found that all his reasearch interest is Security in "Computing and Communications,Signal Processing, Machine Learning, and Optimization"
& this is not what i want i speak about the front end (RF part) of the receiver , Anyway thanks for help:)
 

Can you describe , that what is LTE receiver , please? probably , thus , i can help you.
Respect
Goldsmith
 

Two books are all you need.

1 - Gu - RF System Design of Transceivers for Wireless Communications
2 - Egan - Practical RF System Design [Hardcover]

Then, you need to figure out what release of LTE you are going to pursue, and grab the appropriate set of specifications from 3GPP. Probably 25.101 is a starting point. Print out those specifications, and start building up radio level specifications (Receive Band width, blocking specifications, ACLR on transmit, etc) and break it down into the radio requirements you need to meet. Make sure you know where your specifications come from, so you can go back and make sure you meet them.

ISSCC papers in the past 5 years are also very useful, as all the RFIC companies have been pretty good at printing details. Read through those, and you'll have a good start.

Dave
 
  • Like
Reactions: MFayek

    MFayek

    Points: 2
    Helpful Answer Positive Rating
Dear GoldSmith,
By LTE receiver i mean the RF front end of a wireless receiver for mobile set (UE ).
Thanks for ur concern:)

---------- Post added at 08:22 ---------- Previous post was at 08:01 ----------

Dear RFDave,
Thanks for ur reply , You're post is rich of resources .I think that ISSCC papers is the most resource that i've not put in mind,so i'll consider it . Appreciate your detailed reply
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top