Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Altium designer Help: How to do hierarchical blocks in altium

Status
Not open for further replies.

K.Srikanthreddy

Junior Member level 2
Joined
Dec 8, 2011
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,392
How we will construct hierarchical blocks in altium and top down methodologies.





Thanks in advance
 

Hi,

You can do this a few ways, probably better to start with the place --> sheet symbol and place --> sheet entry. The sheet symbol is your hierarchical block and the sheet entries are your ports.

The wiki will give you more detail that I can hope to explain - **broken link removed**

Chris.
 
Create an empty schematic page and use: Place->Sheet Symbol. Do this for every page in the schematic. Double click on the Sheet symbol and set Filename to schematic page you would like to include in the hierarchy. Then, right click on Sheet Symbol and: Sheet Symbol Actions -> Synchronize sheet Entries and Ports. Select "Unmatched ports" and press Add Sheet Entries.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top