Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to measure low & high current

Status
Not open for further replies.
A

ahmed osama

Full Member level 6
Joined
Jul 18, 2004
Messages
352
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,296
Location
Cairo, Egypt, Egypt
Activity points
2,652
dear all

how to measure the a low current about 50mA to high current about 50A , is it current transformer or shunt resistor , i found the shunt resistor expansive and using CT always use for better for high current

thanks bye
 

hi
i think you can use
hall effect current sensor

---------- Post added at 17:23 ---------- Previous post was at 17:04 ----------

hi
i think you can use
hall effect current sensor


 
Now-a-days in the market very nice and of good quality Clamp ON meters are available even for DC measurement with adjustable ranges from Low to High. The easiest and trouble free way of measuring current. The shunt resistor is better but needs extensive efforts and time consuming along with a High Cost process.
 

please tell me what is shunt resistor method....and how it is measured

---------- Post added at 22:10 ---------- Previous post was at 22:09 ----------

Is hall effect is based on magnetic flux for measurement of current ....:???:
 

Here is the procedure of measuring the current with shunt resistors.
**broken link removed**
Yes Hall Effect is based on Magnetic Flux measurement system.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top