Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
hi Jaydeep,
I am looking for the same specification of XY2-100 protocol for laser galvo systems.
Will be of great help if you could share any information about it to me...
thanks in advance...
@AMK Thanks for your explanation.
Actual operation in which this code is a part of is in writing a numerical value into a block of size 16 byte.
I want to know how this manipulation affects in storing what value in which place..
Can someone show light on this issue please...!
'Shift bit to the right
dim tempval, amount as long
Dim SendBuff(0 To 255) As Byte
tempval = amount
For index = 1 To 24
tempval = tempval / 2
Next index
SendBuff(6) = tempval And &HFF
tempval = amount
For index = 1 To 16
tempval = tempval / 2...
Hi!
I have a fast analog module 1769 IF4FXOF2F.I am using rslogix 5000 version 17.When i try to add new module in the compact bus,I am not able to find the above mentioned catalogue number.What am i supposed to do to add this new module into my project!...have done onething have called up...
hi!
I am a new bee in drives world. well i have started on with a servo drive for AC servo motor. its Ultraware 3000 drive,I really dont know whats the exact purpose of connecting a shunt resister( some times external and sometimes internal) for the operation of the drive.
Is this shunt...
I tried the link it takes me to cartfly.com, a free shopping portal listing service.I believe if thats the same case with anyone else, then this thread has to be thrashed.
help in servo motors
hi!
Can anyone help me out by clarifying things about position control and velocity control in servomotor controlling, like what it acctually means when using it....?
To what application are they specifically used...? can the both be used together...?
can someone give some...
"But what I probably do not know is how to integrate all of these together.
Any good resources/ links on this?"
Well integration with a fulfilling purpose to increase the efficiency of the operation is the purpose of Robotics.So only thing that matters is what is your integeration result...
RS232 to RS485 Converter
what is the puporse of S7-200 convertor you are aiming for ...? is it to communicate your programming device with PLC or you what to establish free port communication with some PC.
I believe by now you would have understood the application of genetic algorithm toolbox.Well i carried out theoretical analysis in design of PID controller and simulation in matlab.I used MAtlab for the purpose of parameter optimization.As a mater of fact i didnt use the genetic algorithm...
hi guys!
I am using GEFANUC ic200udd104 -14point micro PLC with 8 dc inputs and 6 dc outputs to configure a High speed counter in channel 1.I have a pulse train input of 2.5khz to be counted with this counter.I admit i am not confident with the explanations provided regarding that in versa max...
cx-one_v.3.0.009
hi!
you have said that the controller has some ladderlogic in it.well is it functioning well...? is there any errors with PLC...?
you said you have the hand held programmer with you.Did you try to interface it with the plc....?
were you able to go online after interfacing it...?
Re: need to know value of this in industrial auromation care
Yeah what you say is golden words!!!!
thanks for the reply
wish i will start my hunting for valuable experience soon.
hi i am arun from India a freshly graduated electrial engineer with loads of interest to enter the domain of industrial automation.I am planning to join a certified automation engineer programme.I would be really grateful to you if you can give me some idea how far the programme would be of help...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.