Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
in xilinx ISE
After synthesis of our program, ISE will give the required hardware as per your program. So if you double click on the top level block then it will show you the internal hardware of that block with its signal names which you have used in your program. In this way you can go up to...
Hi,
If you are using any embedded development board which can is having suitable interface to connect a GSM MODEM and have Audio CODEC, flash memory connected to the MCU then I think the following procedure can help.
1. store the audio file in on-board flash or external MMC
2. Whenever sensor...
creation symbol
You can create your own new symbols or request/download from the chip vendors website!
Why do you want to create symbol from layout?
Regards..
Re: How can i measure distance using ultrasonic (only analog
Yes, your concept is right. You have to transmit a sound wave using sound transmitters and receive the reflected sound signal using a hydrophone array. Measure the strength of the received signal, compare with the transmitted signal...
This is a simple code and easy to code it in verilog. what actually you want to do after conversion? If you want to learn verilog then this is not the way.
There are some free VHDL to Verilog conversion tools available to convert simple or complex codes. please do a google search you will find...
Do you want to start a services based company or products based company?
If that is a services based company then you need few good engineers with positive attitude first. Positive attitude is very important for a startup. If you hire some engineers with fickle/hopping mind then that will be an...
matlab counter
You can implement your own counter using flip-flops and gates to count up to your maximum value. You can implement a loadable counter which can count up to the loaded binary value. Pls look at loadable/programmable counters.
Regards..
If you want to access technical documents like full datasheet of these products then you have to sign NDA. There are good opensource communities available for technical support of TI products.
Regards.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
