Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Finally I found a way to input variables and results to matlab by using the Matlab Output block in the schematic. I don't need the dataset, although I still do not know how to display or read the dataset. My problem has been temporarily solved. Thank you very much for all of your usefull hints.
I'm terribly sorry to bother you this much. I've just found out the parameter was outputted in the same folder of the schematic. So that's mean my bat file did work. However it seemed that the dataset was not generated, and I could not open/display the dataset file (.ds) using the command line...
Dear pancho and volker,
Thank you very much for your valuable time and advices. I'm following **broken link removed** to creat a bat file to set the environment variable and run the netlist.log.
Here is my bat file
set HPEESOF_DIR=C:/Program Files/Keysight/ADS2015_01
set...
Oh that should be. I'm using Windows 10 and ADS 2015.01. Could you please send me some tutorials how to set environment variables to include ADS directory in command search path? Thank you very much.
Got it! It is working now. Thank you so much for your help. Just one more question, about the dependency. In my case, dependency of L4 is Pin. With 401 values of Pin, there are 401 values of L4 but they are the same (of course, it does not change in one time of simulation). So, how can I export...
Dear pancho_hideboo,
Thank you very much for your advice. I've tried the following commands in a Matlab script:
command = 'hypeesofsim netlist.log';
status = system(command);
And the results:
'hypeesofsim' is not recognized as an internal or external command, operable program or batch file.
I know some posts have mentioned about cosimulation between Matlab and ADS Plotemy, but what I need is to run a basic ADS simulation (HB simulation for example) from matlab, so that I can control the optimization from matlab, I guess.
I've also read this thread: **broken link removed** . I...
Thank you very much for your comment. I tried using Eqn to write write_var() in Data Display, but it gave error: While evaluating x1, L4: word undefined. I used the same equation of x1 as in the schematic.
It seems in Data Display the variables are not recognized. How to use variables in Data...
Dear Volker,
Thank you very much for your comment. Could you please explain more about the order the MeasEqn are avaluated? I do not understand this.
I've tried to export from data display. It is okay, but because I need to do a lot of iterations, so it will be very time-consuming to manually...
I'm simulating my circuit in ADS. I was successful with exporting variables to text file using write_var. But I do not know how to export equations (from MeasEqn blocks) to text file. I've tried but it gave the following error: Evaluation failed for 'x5 = write_var("PCE_area.txt","W","PCE...
Dear BigBoss,
Thank you very much for your comment. My 1st goal of measuring input impedance is to do the matching. My 2nd goal would be to vary the load with a variable input power to find the optimal load for this topology.
There is a very detailed clip...
Dear all,
I know this is a very basic issue, but I'm new to ADS and I'd like to make sure my understanding is correct. Below is my schematic in ADS. I'm using S-parameter simulation. I got the values of S11, Z11, Zin in complex number format. I got confused about these terms:
1/ Zin and Z11...
Hi all,
I'm designing a rectenna for harvesting power from UHF band. I've found a paper describing somehow in details of designing such a rectenna. The first image is the prototype rectenna, while the 2nd one is the matching network. The frequency is 868MHz. My questions are:
1. The traces...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
