Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by srujan1708

  1. S

    microstrip parallel coupledline bandpass filters

    i am designing 4-5,5-6,6-7,7-8GHz bandpass filters which dielectric constant is good? what substrate height is good? please help me.
  2. S

    SP4T using PIN Diodes

    for spdt i am getting bandwidth(4-8GHz) but sp4t i am not getting. I attached schematics. https://obrazki.elektroda.pl/12_1333104401.jpg https://obrazki.elektroda.pl/54_1333104401.jpg https://obrazki.elektroda.pl/57_1333104401.jpg https://obrazki.elektroda.pl/19_1333104401.jpg
  3. S

    SP4T using PIN Diodes

    i am not getting wide bandwidth
  4. S

    SP4T using PIN Diodes

    how to design SP4T switch in C-band using PIN diodes? please help me.
  5. S

    how to design edge coupled strip line bandpass filters(4-5,5-6,6-7 & 7-8GHz)

    please help me I calculated Zoe, Zoo. Then using linecalc (ADS), I calculated Width, Spacing, Length for coupled strip-line (SCLIN). Using these values I am getting good results in Schematic. But with momemtum (Layout) I am not getting. Then I chop all Lengths by 0.165xb (b-thickness of...
  6. S

    Band-pass filters with lumped elements

    Are these BPF's (1-1.5GHz, 1.5-2GHz, 2-3GHz and 3-4GHz) realized with lumped elements practically?
See more

Part and Inventory Search

Back
Top