Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
manual for ams using kitkit
Installation manual is in docs
/set your environment
/"for bourne shell looks like this"
cadence layout editor
I'm writing some tutorials so that's why I need cross section view.
Well, I know that it can be extracted to gds or cif , and I imported with L-Edit but it's not good because I don't have apropriate technology file for L-Edit (AMI06 from NCSU kit) .
I'll try to find...
Ok I deleted IC5033 dir because it was only contained link to tools.lnx86, also I changed .bashrc removing all /IC5033/ from it.
And guess what ?
icfb& from terminal/console starting Cadence without errors.
10x a lot
_devalidateviewtype is not registered
Here is what I've done about linking :
> ln -s /Cadence/tools.lnx86 /Cadence/tools
> ln -s /Cadence/tools.lnx86 /Cadence/IC5033/tools
> ln -s /Cadence/tools.lnx86 /Cadence/IC5033/tools.lnx86
here is my .bashrc :
cadence after start up
After 3 weeks and more I finally started Cadence without errors.
I must enter following lines in console :
> cd /Cadence/tools.lnx86/dfII/bin
I still don't know why
10x a lot m8s
unable to find the cadence software in your path
I got the same errors with ISR200503311200 and ISR200406181244
if I try to open some schematic from NCSU libraries get this warning:
*WARNING* _deValidateViewType: viewType is nil
it looks to me that it doesn't know whit what tool to open file...
*warning* _devalidateviewtype: viewtype is nil
I installed IC5033 on SUSE 10.0 and when I run icfb&
in log window get this
*Error* The function schAddPinListToViewReg() was...