Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Open-drain - An open-drain or open-collector output pin is driven by a single transistor, which pulls the pin to only one voltage (generally, to ground). When the output device is off, the pin is left floating (open, or hi-z).
check this...
Hi Mr. Elec,
You said the model is designed to work at 60GHz but in your model you have given the working range as 50 - 70Hz. change the freq min and max to 50e9 and 70e9 respectively.
and then you are working in mm dimensions so your lambda value should be c0/freqmax*1e3
Try this out.
May I know which version of FEKO you are using so i can see if i can run in my system
- - - Updated - - -
Hi MrElec
Warning 594 : This may be due to small electrical size of your design and/or your frequency is too low.
Hi Matthew,
You can download cad models of car from GRABCAD, where readily available models are there.
In case of inherent model in feko, you can go to your drive where feko is installed (C: or D:)/Program files/altair/feko/examples/resources/automation
There you will find car_geometry.x_t.
it...
Plane wave source
All other sources will also be considered active during the computations for each plane wave
incident direction.The preview indicates the polarisation of the
E-field (green arrow) and the direction of propagation of the plane wave (blue arrow) for each
of the defined incident...
hi dave
thank you for your reply.
sure will try it out and see.
do you any other suggestions like patch or wire antennas because i need less computation time
thanks
soundav
Need help to design UWB antenna for C band
centre freq - 6GHz
bandwidth - 500MHz
gain - 6dB
Suggest some antenna designs that can be done for the specified parameters.
Thanks in advance.
The LA7693x series is a single-chip video and sound processor IC with a built-in microcontroller that supports all of the different worldwide broadcasting systems. The IC provides fully integrated solution to rationalize the design of color TV sets, increase productivity, and reduce total costs.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
