Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I not see great advantage with second image.
You can add a copper shield, (blue color) but this cannot make a great advantage.
The RED plane are the most important, reference (GND) and EMI shield plane.
Skywalker.
Re: Cadstar to PADS
I have converted old releases of source Cadstar files (5.0 and 6.0) in PADS, fine and good !
Must important to have in Cadstar, NOT used strange configurations or tricks.
But remember, ANY good conversion after made, NEED some manually tuning.
For "aey" very good slide...
Re: Cadstar to PADS
hi v-Kumar,
wich release do you use of PADS ? If you use PADS 9.0 ol later, you have the translators (schematic and pcb) in your installation. In 2007 releases of PADS you need to download and install the translators, from Mentor site.
Do not use .rinf ! Is used by Cadstar...
Hi, the best practice is to use a new netlist with changes, in ECO mode.
Otherwise you can delete a old part then you add a new. But in this case you delete and add connections manually, not recommended for complicate board.
If you edit a decal in pcb layout, you cannot delete a pin and cannot...
mentor graphics pcb pads price
Hi,
At this time the support of Mentor are very best, for all aspect. Expedition, are high-end tool, but Not so ease to use.
For my experience, PADS > Altium for pcb and routing. The DX designer are now updated, not easy but good, need some updates for increase...
Re: 2 layer RF PCB
Another important consideration.
The impedance of micro-strip lines, is not the same if the dielectric thickness change.
IF strip-lines are used in the four layer, this may result in a big problem into 2 layer board.
Skywalker.
I have notice for new PADS 2007.3 release.
Wath are new in this relase ?
Are Layout and Router in one only envinroment ?
Please share any info, but respect the board Rules !
Skywalker.
Linux are very good OS for other reasons:
- High Reliable and Robust platform. The RED HAT releases for example.
- True multitasking OS.
- Linux have very low problems for Virus and other malware.
- Linux not need updated and moore powerfull hardware ! Last Windows OS need new and high-power...
pcb design in iran
The most popular software for pcb. Easy to learn and use, with RF features, and SI capabilty, and for professional use, but not much expensive, is P A D S.
The best pcb soft is E x p e d i t i o n, but for high end professional use. I have see and used Expedition, Very...
list of pcb making software
For ericmar,
After many years Cadstar are enhanced, but it's not powerfull, and not very easy to use.
The best pcb layout eda tools today are Allegro and Expedition, for large and dense board. Expedition have introduced for the first time new features for high...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.