Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hi,
I wonder if you could introduce me a current clamp circuit to cut the currents more than 20mA, or any reference that can help me out with this?
Thanks.
Re: radiation pattern matlab
In order to plot the radiation pattern, you need to have the electric(magnetic) fields. There are some classic shapes, for example rectangular apertures with classic radiation patterns.
You can find the radiation pattern for these apertures in any antenna text...
Re: how to plot radiation pattern
Hi:
What do you mean by "taking theta and phi values"?
For this post, as you can see, I used MATLAB to re-plot a radiation pattern which I generated with HFSS.
So my angle data were ready and I just needed a function to SHOW that data in 2d/3d.
Regards
size of port in hfss
Hi:
As far as I know, the size of the lumped port is not important unless you want to see the input impedance.
I am not sure, but you can try by varying the size of the lumped port and consider the frequency response.
antenna radiation harmonic
Hi all:
I haven't still get the answer. Does any one know how to compare the radiation patterns for an antenna in any software, doesn't important. In papers, there is only the measurement results, no simulation. I am wondering if it is possible to do the simulation...
antenna radiation patterns normalized
Hi all:
I want to compare my harmonic radiation patterns in HFSS?
I have two antennas:
1) reference
2) improved antenna that has a reduced second harmonic radiation
I expect that the radiation of the 2nd antenna in the 2nd harmonic would be lower than...
momentum mesher
Hi Tucco:
As you said, one obvious way is to increase the mesh sizes in arcs and edges, therefore reducing the simulation time. But I was talking about the previous mentioned methods in this topic. Have you worked with them? I tried all of them, but no chance in decreasing the...
mesh ads layout
Hi Tucco, kspalla and dynaren:
I have a simple but heavy structure in ADS. The shapes are some u-strip transmission lines and some circles. I have simulated that before, but wanted to test your approaches.
I tested all the mentioned methods, but the number of meshes didn't...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.