Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by sb

  1. S

    Looking for fpga pci schematic

    pci schematic Hi, Don't waste your time implementing PCI to FPGA. Try https://www.plxtech.com/ They make some PCI bridge and target IC's. You'll only have to interface your FPGA. Good Luck.
  2. S

    Recommend an alternative small OS

    nano98 gone Hello, Try these two unix clones: **broken link removed** https://www.uclinux.org/ SB
  3. S

    New open source embedded TCP/IP stack

    uip 1.0 gprs Hi Guys, Why don't you check this out: The uIP TCP/IP Stack for Embedded Microcontrollers https://www.sics.se/~adam/uip/ They say "uIP is an implementation of the TCP/IP protocol stack intended for small 8-bit and 16-bit microcontrollers. It provides the necessary protocols for...
  4. S

    What are the difference between PCI-X and PCI Express?

    Re: PCI-X vs PCI Express Hello, Just check this link: https://www1.us.dell.com/content/topics/global.aspx/vectors/en/2004_pciexpress?c=us&l=en&s=corp
  5. S

    PAL/NTSC conversion with FPGA...

    pal to ntsc fpga Hello, You should check the PAL/NTSC specifications with great care. If you transcode from Ntsc to Pal its fairly easy making 25 frames from 30. When you do the reverse PAL to NTSC you have to make some motion estimations (and maybe 6 frames store??). Try to check Snell and...
  6. S

    QDR SRAM Memmory Controller

    Re: QDR SRAM Controller Hello, The best way is to look at the memory corner of Xilinx's site: **broken link removed** **broken link removed** Best Regards, SB
  7. S

    C code for driving the SED1530 graphic LCD driver

    sed1530 programming Hello, Try this: https://www.geocities.com/g13685/DMX_973_973B.html
  8. S

    Use chipscope to capture some signals from my FPGA

    Chipscope version bug Hello, If you don't belive me just read xilinx's website: https://support.xilinx.com/xlnx/xil_ans_display.jsp?iLanguageID=1&iCountryID=1&getPagePath=16875 Family: Software Product Line: FPGA Implementation Part: ChipScope Pro Version: 5.2i Record Number: 16875...
  9. S

    Use chipscope to capture some signals from my FPGA

    Chipscope Hello, Chipscope only works with the respective ISE version. If you have Ise 5.1 it only works with Chipscope 5.1 but not the other way. Get the proper version for ISE 5.2. SB

Part and Inventory Search

Top