Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I am trying to see if I can reduce cost, but it seems that the DC DC is more pricy to boost 1.5 V battery to 3.3 V?!
Is anything else I have to pay attention to when I use 1 battery?
Thanks,
Sanna
one battery
Hi,
I am designing one battery remote and thinking to use one AA battery instead of two. using a DC DC converter to boost it up to 3.3 V. Just wonder what can be disadvantages with one battery except battery life and what I have to concider with one battery.
Thanks for all help
Hi
I have 5 temperature sensors and by cables they will be connected to a device with 1-5 inputs to display temperature. does anyone have a suggestion about the device which display the temperature? thanks for all advice.
HI,
I just wonder what kind of components can I use on FR1 board? can I use Microcontroller on FR1?
I have one remote board and wanted to put all my numbers on FR1 is it possible?
Thanks,
octave wavread
Hi,
I just want to read a wav file in octave but it doesn't work. I have a mic1.wav on my desktop. I write y=wavread(mic1.wav); in Octave but I get error:
error: 'mic1' undefined near line 25 column 13
error: evaluating argument list element 1
I can't understand what is...
Hi,
I am going to use Octave to analize my signal. I have an analog signal from my hardware. I want to transfer it through my sound card to pc, Octave. Any one has any idea how I should do that?
Thanks a lot,
Sanna
Hi Muralidgara,
Could you please explain a little more how should change the pattern?
I have also a circuit with an analogue output and I want to see the signal in PC.
I know there is one osc, PICOSCOPE but it is very expensive. Do you have any suggestions?
Thanks
Sanna
Hi,
I have three sensors. All three sensors have 1 common signal+noises. Is it possible to subtract signals so I get that common signal out of three signals from sensors with help of BSS? And I wonder in which enviroment I should write the codes (FastICA?)?
Thanks for all help
Hi,
I am wondring when I should use crystal for my PIC? i see some applications use crystal and some don't. Is any one can explain for me what is a crystal for?
Thanks a lot,
Hi,
I am thinking to use two sensors. One sensor detect a signal +motion and another sensor detect just motion. Is any way I can subtract these two signals?
Thanks
Hi,
I am thinking to use two sensors. One sensor detect a signal +motion and another sensor detect just motion. Is any way I can subtract these two signals?
Thanks
flash_read() hi tech c
Hi Waseem,
You are right I took away these code which save the data in buffer. Now I compare it one by one so it takes less of the RAM.
Could you please explain for me how I can change the pin and read from that pin I want.
For example i want to read from my Vref (AN1)...
adc header file of mplab
Salam Waseem,
Thank you, you are really nice. I wish you good luck. It was really big help because I am a beginner in programming microprocessor. To be honest this is my first PIC. The code was really useful the only different was that I am using Vref (AN1) as an analog...
mplab hitech c reference
Thank you Waseem, it was very nice of you to help me. You are realy good and helpful. I will study your code.
May I ask you where you live?
Regards,
Sana
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.