Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by salmanshu

  1. S

    A String of Resonators

    https://www.pcbway.com/project/shareproject/Stan_Meyer_s_Steam_Resonator.html this project might help you, he has used string of resonator in a parallel circuit similar to you problem. check this out.
  2. S

    [SOLVED] PINS TERASIC ADDA

    share the full code and pin out datasheet.
  3. S

    Altium Designer milling slot?

    i think problem is with the version.
  4. S

    [SOLVED] Binary Subtraction

    Binary subtraction is also similar to that of decimal subtraction with the difference that when 1 is subtracted from 0, it is necessary to borrow 1 from the next higher order bit and that bit is reduced by 1 (or 1 is added to the next bit of subtrahend) and the remainder is 1. and your answer is...
  5. S

    [moved] Polarized glasses

    Polarized sunglass lenses reduce light glare and eyestrain. Because of this, they improve vision and safety in the sun. When working or playing outdoors, you can become frustrated and even temporarily blinded by reflected light and glare
  6. S

    Guidance on best suitable maintained framework probably open source for ESP8266

    https://www.pcbway.com/project/shareproject/PM_HeartBeat.html this ESP8266 project will help you understanding
  7. S

    Will the mosfet turn on? I say it will

    it will trun on as Vgs= at least equal to -(Vbat - Vdiode).
  8. S

    Capacitor between grounds.

    to ensure that both the ground have similar potential value.
  9. S

    Transformer and Inductor

    the inductor is a coil in a squirrel shape while transformer is somehow similar to inductor in a sense that a wire is wrounded around the core of transformer just like inductor
  10. S

    Causal and anti causal

    you can represent the signal in causal and anti causal signal by converting into minimum phase system and all pass system.
  11. S

    What is (*S = "TRUE") in Verilog?

    Kind of bringing up a topic from the dead, but something like this would be very useful. Ideally, you spec out your particular design's constraints in Chisel and Chisel will dump some config file (or something into the Verilog code) that will make sure that everything is interpreted correctly by...
  12. S

    Help with sketching the signal

    put values from -6 to 6 in n and change value of k according to n. x[-6]=4 ,x[-5]=2,and change values by simply puting values in question.

Part and Inventory Search

Back
Top