Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by rsmatias

  1. R

    Specctra not shutting down

    You are right! I have a QUIT option in the menu. The problem is that the window closes but the program remains running. I have to "End Program" using Task Manager. Isn't it strange? Best regards, RSM
  2. R

    Specctra not shutting down

    I made some tests with specttra but it does not shutdown automatically. I allways have to make ctrl+alt+del to access windows task manager to kill the process manually. I've tried many possibilities in the specttra and pcad router menus about quiting after the job is done, but notthing till...
  3. R

    Coax cable manufacturers or distributers

    A friend of mine told me about that manufacturer the day after I wrote this post. They have many cable models, and good quality as far as I know. Let's see if anyone has some more options. best regards, RSM
  4. R

    Coax cable manufacturers or distributers

    Hi, I'm looking for a coax cable manufacturer or distributer in Europe, for the following cables: RG-174, RG-316, RG-142, RG-223 and crimp plugs and jack for those cables. Anyone can help me? Best regards, RSM
  5. R

    Programmer for 18f252 and 12f675

    12f675 icsp You can try propic2 programmer. Works great with me! But the software I use with it is IC-Prog v1.05c Best Regards, RSM
  6. R

    Rubber antennas for 433MHz aplications

    I need cheap rubber antennas for 433MHz aplications with SMA Male plug. Any ideias?!
  7. R

    Problems getting PIC 18F252 to work!

    PIC18F Problem Solved Thanks for your answer Jayson. A few minutes after after I have posted the message reporting the problem I found what was causing it. Well, as you said we have to pay attention to the config of Low Voltage Programming because by default it is set and as I didn't have...
  8. R

    Problems getting PIC 18F252 to work!

    Hi! I've been trying to put a 18F252 to work without success. Using a crystal of 4MHz the PIC oscillator (OSC2) only starts if I use oscillator mode HS. Is doesn't start with XT mode. Even using HS mode the PIC only works if I touch with my fingers in the Positive connection (Vdd) near Vdd...
  9. R

    Microchip ICE 2000 alternative

    Hi, I haven't tried any of this options. Neither ICD, ICD2, ICE2000 or any other tool. Since I started using microchip processors I allways programmed Assembler and programmed ICs for testing or proto-boards. But problem comes when trying to solve "weird" problems on program runtime...
  10. R

    Microchip ICE 2000 alternative

    First of all thanks for your answer. It connects to the serial port, what is very good in my opinion. I prefer this option than the paralel port. And it's cheaper to convert to USB. I like most of the features I read on the webpage. The IDE (TDE) looks very complete. Do you know anyone using...
  11. R

    Microchip ICE 2000 alternative

    Anyone knows of any alternative to the ICE2000 development tool? It's very expensive and most 99% of developers cannot afford it. Thanks, Rodrigo
  12. R

    Protel DXP place pin increment

    TAB is the answer Thanks for your TIP. I'll try it. RSM
  13. R

    Protel DXP place pin increment

    What? Hi, What do you mean by starting in zero again? RSM
  14. R

    printers direct for pcb??????

    Ink test Hi, You are right! But I still have to get the cartridge! I have an EPSON Stylus Color 880 but I'm not shure that the INK is the same! I heard that to print on CDs or DVDs you have to buy some special ones already prepared for that. Maybe the surface is not equal. RSM
  15. R

    Protel DXP place pin increment

    dxp autonumeric Hi, Anyone can tell me how to reset the place pin auto increment counter in the schematic editor? RSM

Part and Inventory Search

Top