Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I'm designing a wireless power transfer system in HFSS using the magnetic near-field. The transmitter can be of any type but the receiver has to be small enough to be integrated within a device (between 1mm to 3mm thick). I'm designing the transmitter to be a helical coil as it has a large...
How can I design high q spiral planar inductors? i know for helical inductors there is a parameter like length to diameter which should be almost equal to 1 for best quality factor but what about planar inductor? I know more turns means higher inductance and then high Q but are there are no...
Hello,
I have a 2 port model in HFSS with 50 ohms lumped ports. Basically there are 2 coils coupled together at a frequency near 10 MHz. I got an S21 value of slightly greater than 1 at the resonant frequency. Does anybody know why this happened?
Hi,
I have a design consisting of a transmitter and a receiver separated by 1 meter and wanted to ask if anyone knows how to plot the E/H field in the region between them or the near field?
Thanks
Hi,
I'm designing a coplanar waveguide spiral inductor in HFSS. I draw the waveport with dimensions: Width = 3(2g + w), where g is the gap size between the ground and the conductor and w is the width of the conductor, and length of 4*g as said on the HFSS guide. I drew rectangles of these...
Hello,
I've just deleted my project from project manager in HFSS by mistake. Is there any way I can recover the project? I've been working on it for 3 months! :(
Hi tallface65,
I've just opened your project and thank you, that's exactly what I need. Can you just explain to me in detail step by step how you did it if you don't mind? As I'm a beginner in HFSS and still in the learning process. I would really appreciate it. Thank you.
I wasn't told how to do it, just that it is possible by an engineer. It's a high frequency application. I have both HFSS and CST so I can work with both but I try to build all my structures and do all my work with HFSS if it's possible.
Hi drkirkby,
I think I can import DXF files in HFSS. I know in MWS CST there is a macro to create a toroidal coil and I've been told that I could create the toroidal coil in HFSS from scratch although I couldn't after trying for several days.
Hi
Anyone know how to draw a Toroidal Coil in HFSS for simulation? I drew the Torus as the core but I'm not sure how to draw the copper coil surrounding the torus. Any help would be appreciated. Thank you.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.