Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Well I agree. You should follow the error and there is really not such a directory. However somewhere a long the line, it is calling the wrong path. Probably you haven't installed in the directories that I have said. This procedure only works if you install it in the directories that I have...
redhad
Hi Benny,
First make sure that you have installed it on RedHad 7.3. I don't know of any problem when you install it on RedHad 7.3. Check the board for the following error you have mentioned.
Enjoy,
RF_Router
install redhad
Hi Benny,
You can basically install it any where and use your modifications no problem. I only wanted to create a straight forward, step by step procedure that if you follow it and install it in those directories, which I have mentioned, it should work fine.
Enjoy,
RF_Router
icfb icms command not found
Hi troops,
I did not add this copy to .cshrc, however it is in excellent suggestion. I simply copy paste it from a file which I store these commands. But it is a good possibility. The lmgrd doesn't start automatically everytime and you have to start it. I believe...
icfb installation copy
Hi,
Your path is not /root but from / (The top of the directory). Do several times CD .. until you get to the top of the directory. Your problem is that you have installed it not in the place that I have told you. You should have installed it in the top of you...
ic5 license.dat server
I have done this installation guide for IC5 on RedHad 9.0 after tons of confusion among many of the users which are not familiar with linux and had many problems with installation such as display error 8bit and 24bit. Could not extract files cause system is not familiar...
mmic rfic different
Another question.
Is the process of developping the MMIC design is the same as in RFIC design? I mean the transmission lines, thin film processing, MIMs, the spiral inducators and transistors.
what is the difference between rfic and mmic
This is also what I think. But is there anything in design difference or it is the same as in MMIC design.
Thanks
RF_Router
difference between mic and mmic
Hi all,
I have a question. Is there a difference between RFIC and MMIC or they are basically the same.
Thanks
RF_Router
Hi,
If you didn't take care of the NF in the LNA stage itself and even before it then, there is not much you can do after the LNA cause NF is additive. If you produce a poor NF, you will not be able to fix that.
Enjoy,
RF_Router
Hi tilhu,
I believe I have installed it correctly cause it went through the entire installation no problem.
I have problems setting up the variables. I don't really know how to do it. I entered the variables in CSH (cshell) manually. But I had problem with running the license file.
So first it...
Hi all,
I have difficulties installing IC5 on Linux 7.3. Can anyone tell me how to setup the environment variables that they will load up automatically?
Thanks
RF_Router
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.