Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I didn't tried oscillator at all because of I don't have 4MHz Osc, i have only 20 and 30MHz Osc . "Can I use 20 MHz Osc?????????????????:idea::?:"
I tried only Pin5 in LPT port to connect XTAL1.
Thank you.
I tested the cable, it work's fine with other AVRs. but still have problem with mega128.
////////
I think the problem not from CKSL. I think from disable spien.
I used USBisp programmer "http://www.fischl.de/usbasp/" and the Program for Programmer "http://www.khazama.com/project/programmer/"...
Pin 5 on LPT port.
Yes, I did in pure DOS.
I didn't use hardware SPI. I used PE0 and PE0 not actual MISO=PB3,MOSI=PB2 pins.
What I can do for this?:?:
My board dosn't has any addditional components.
the reset line connected to pin6 on LPT port as schematic in "FuseFixCDV2.zip"
How can i...
I used the cable and connect pin5 to xtal1 but i face this :idea:
Can't resync
Reset pin released
I think this got with "ScOe". my port is good and i use it for drive CNC machine.
MISO and MOSI pin in cable must connect to MISO and MOSI on atmega128 OR to PE0 and PE1.:?: I used PE0 and PE1...
It relly dosn't work. what can i do now, I lose my mind.:|:cry:
I think atmega128 is different.:?: I lose 5 microcontrollers by wrong fuses "disable spien".
Someone Help me.
Re: There are various methods explained here in this thread.
Thx, But there is many methods explained and I don't Know what can i do now. I want the easy one. please can you refere to post on this topic.
can I use high voltage programming for atmega128? what is the method?
Thanks in advance.
atmega128 spien disabled
atmega128 spien disabled
Hello
Please Some Help, how reprogram atmega128
I programed the atmega128 with avrisp programmer and Khazama Program but spien disabled by wrong.:cry:
what I can do to reprogram the atmega128 with avrisp.
Thanks in advance.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.