Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by pekachoo007

  1. P

    Has anybody used Oceane for IC design

    Anyone designed with Oceane?
  2. P

    [moved] Timing switch in Cadence

    How to implement timing switch in cadence spectre
  3. P

    test bench for load and line regulation measurement of LDO in cadence

    Anyone?? :-?
  4. P

    How to find slew rate and settling time of opamp in cadence

    How to plot and measure them in cadence spectre?
  5. P

    Open loop settings??

    might not be - - - Updated - - - How to reduce the frequency of its dominant pole
  6. P

    Open loop settings??

    The purpose might be certain, with the certainity principle lying somewhere.
  7. P

    Open loop settings??

    Why to fret about million years, the values are for the test bench. - - - Updated - - - Around 70. What it should be then.
  8. P

    Open loop settings??

    Set AC source with AC Magnitude=1 V, DC Voltage=1.1 V, f=10 MHz db20 = 44 db What would be phase Margin, is it 180-67= 113??
  9. P

    Open loop settings??

    I have done this but not satisfied with results. What would be use of these extra calculation, how they would be helpful. As you suggested, could you provide the formulas also.
  10. P

    Open loop settings??

    What settings should I give to Cadence Spectre for simulation results of gain and phase margin
  11. P

    How to avoid restart after every xming, xming fonts setup

    I am using Cadence with xming and xming fonts and login into cadence server through putty. I am encountering a problem that i have to restart every time i install xming and xming font on any PC. Is there any setting which i should alter to not get restarted. $ X Error of failed request...
  12. P

    How to fix the Error:Failed to find either 24-bit TrueColor or 8-bit PseudoColor ...

    I ant to connect it through putty by x11 forwarding, using xming and xming fonts through a remote connection. - - - Updated - - - Using Cadence
  13. P

    Open loop settings??

    The opamp is actually an error amplifier part of a linear voltage regulator. The output capacitance represents the gate capacitance of pass transistor. Using 10^12H and 10^12F for L and C values for the frequency of operation of 10MHz.
  14. P

    Open loop settings??

    Is this setting valid for finding the Open loop gain of the opamp. If yes then hows its done in cadence spectre.
  15. P

    How to fix the Error:Failed to find either 24-bit TrueColor or 8-bit PseudoColor ...

    How to fix this: *ERROR* Failed to find either 24-bit TrueColor or 8-bit PseudoColor Visual. *WARNING* Failed to find either 24-bit TrueColor or 8-pbit PseudoColor Visual.
See more

Part and Inventory Search

Back
Top