Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
They all are installed in each separate folder. The latest is set by the last install.
Supose you use 9.3 as working you may still export to old 2005 in ASCII. But you may just change to the folder where it is, e.g.:
C:\MentorGraphics\Pads2005\SDD_HOME\Programs and run either Layout, Router or...
For direct connect you may setup a custom apn with your provider, so the modems will connect through your own private vpn directly.
The other way is to set a simple server, either with dns or full ip, so your modem will send its local ip to this server at connect. It may then querry the required...
gl 100 +gps
Hi Aslm,
The cpu I use is the WMP50/100/150 depending on the application. For automotive spec, the 150 is the only one that goes to 125°C.
The combo can be any, but the minimum required is this size. As you update the firmware you need at least twice the size prior to...
gps gsm tracker
Hi Wesser,
I've been designing GPS stuff since 2000, and have a very nice device.
ARM 946 CPU @78MHz with 8MB Flash + 2MB PSRAM MCP combo (M36WOR6040T1)
3 SIM cards: One InSIM + One SMD and One on Connector.
Has 3 buttons and 2 bicolor LEDs that can be mounted on top or...
Re: GSM modem design
Hi!
Wavecom products are realy cool.
The WMP150 is the only one with automotive specs i've seen.
I've used all kind of modems, like SimCOM, Siemens, Motorola, Sagem, etc...
So it will deppend on what is the purpose of your project.
I was thinking in setting an open...
Hi
Basically a fluorescent lamp is like a spark gap. i.e. if you rise the voltage slowly nothing happens, until around 90 Volts it shorts. This is why normally you need a big inductor to hold the current down. So at old fashioned way, it will flash 120 times per second on a 60Hz AC. Electronic...
Hi
What we did here in Brazil was to record a set of some 100 words from about 16k people over the country, each one with its own accent.
Then we mounted a phonetic translator that recognizes any person talking.
The pnhonetic lib takes up 1MB
The you put plain text on your application, like yes...
Hi all
I think you really should go for ZigBee.
Everybody is now hopping in like Ember, STM, Atmel, even TI that bought chipcon....
But from my own expertise, you should stay out all those vaporwares....
I mean by ember, atmel, ti/chipcon, st and freescale......
You pay a lot, NDAs, volume...
freescale 13192 zigbee
Dear Friends.
Now that Ti has bought Chipcon and ST Micro is licensing Ember's 260 chips, seem that these "diammond" ZigBee sponsors are scaring Ericson to the bones. They now plan some "improvements" on the Bluetooth stack.
Anyway, I've been trying to use all this stuff...
Re: Need Z-Stack.
You may get a demo of the full Z-Stack from Figure8Wireless aka Chipcon aka Texas instruments from (hehe) FreeScale site.
Create a profile and download the full stack (some 74Mb)
hope this helps
I used it some 4 years ago and it seems realy cool.
As it has a digital pll its very easy and fast to do the frequency hopping.
This chip has received lots of awards
Hi
Once ye ol"Newton said F=m*dQ/dt
So a Force can be expressed in a constant m currently known as mass times the variation of the Quantity of movement in time.
So the force neede to "throw" the object deppends in this formula.
Newton "never" said that dQ/dt == acceleration, this is a simplified...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
