Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Re: dsPIC33 2 PWM generate with 180 phase angle with equal duty need help
I am really lucky because at least I found some knowledge from you, I have no education background about this subject, just have a long work experience, this all are doing for first of my hobby & secondly if I provide an...
Re: dsPIC33 2 PWM generate with 180 phase angle with equal duty need help
As I precariously disclose that I already test it. But found a problem that when I change the frequency, the duty cycle range is change, if I increase frequency, the duty cycle range is decrease & vise versa. So I just...
Re: dsPIC33 2 PWM generate with 180 phase angle with equal duty need help
Many many thank's. I already test your code. but it's not generate pwm on pwm pin & how i use this pwm which code you share as 16 bit resolution?
Re: dsPIC33 2 PWM generate with 180 phase angle with equal duty need help
Any body have any sample code for push pull pwm topology in dsPIC33FJ series?
Re: dsPIC33 2 PWM generate with 180 phase angle with equal duty need help
i know Mc Pwm library work.
- - - Updated - - -
ok, many many thank's for try & reply.......
Re: dsPIC33 2 PWM generate with 180 phase angle with equal duty need help
no, i not check in hardware, presently i just test it in proteus, the chip is not available in local market, but with my first code, the pulse show in proteus oscilloscope is ok.
- - - Updated - - -
Mr. baileychic...
Re: dsPIC33 2 PWM generate with 180 phase angle with equal duty need help
//// I also try ///////////
unsigned int current_duty, old_duty, current_duty1, old_duty1;
unsigned int pwm_period1, pwm_period2;
void InitMain() {
ADPCFG = 0xFFFF; // Configure AN pins as...
Re: dsPIC33 2 PWM generate with 180 phase angle with equal duty need help
unsigned int current_duty, old_duty, current_duty1, old_duty1;
unsigned int pwm_period1, pwm_period2;
void InitMain() {
ADPCFG = 0xFFFF; // Configure AN pins as digital I/O...
Re: dsPIC33 2 PWM generate with 180 phase angle with equal duty need help
I already try the library, but no pulse generate, not understand why........ i just try this by doing only copy pase the example code......do you help me to identify where i make the mistake to use the library.......
Re: dsPIC33 2 PWM generate with 180 phase angle with equal duty need help
Standard pwm..........
- - - Updated - - -
Just a minute, i not use any library of mikroC Pro dsPic....
- - - Updated - - -
Thank's for your reply & try to help me........
Re: dsPIC33 2 PWM generate with 180 phase angle with equal duty need help
i have no xc16, i build this code in mikroc PRO for dsPIC, you test it just past it in mikroc PRO for dsPIC.....
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.