Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
i was thinking of feeding this circuit from a full bridge transformer 1/1
This would avoid having high voltage secondairies, but requires higher current from the secondary.
My other idea is to have multiple secondaries each with a bridge and capacitor in cascade.
That would require...
Hi
i plan to make HV full bridge : i will start from a PFC at 400VDC ,i need an output of 3000V @ 1A DC , i plan to use EFD59 cores and a full bridge driven by UCC3895 .
Any hints on the SMPS, i think i use multiple secondaries each with bridge rectifier and put several in cascade . I think...
Hi
That is a good trick ! i want to use the ad8302 too for an auto tuner, but i was going to use an rc network to create a 90 degree shift (close to 90 in fact ). the ad8302 looks nice and i suspect you can use it over a larger power range ( comparing to the schematics of an sg230 tuner where...
Hi
I am experimenting with SMPS, half bridge, i would like to create >600V out @ Pout 100W
I am using an ETD39,split primairy total 25 turns, the secondairy is a single coil 100 turns ,i used a full bridge rectifier on the output with an extra coil between the bridge + output and the output cap...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.